Netgear WGR614v9 Motherboard Replacement

Scritto Da: Ryan Murphy
  • Commenti: 0
Netgear WGR614v9 Motherboard Replacement

Difficoltà

Moderate

Passi

6

Tempo Necessario

Nessuna stima

Introduzione

This guide will allow you to separate the motherboard from the lower case.

  1. PUOm6cJT3t1UOAqv

    • Rotate the device so that the bottom is facing up.

  2. Pbx1oLZVUEDK1QO6
    Pbx1oLZVUEDK1QO6
    ub4YFSRPNfdyPsDi

    • Lift up all four rubber pads on the bottom of the router with the plastic opening tool.

    • Be careful not to pull the rubber pads all the way out when lifting as they are difficult to reinsert.

  3. IHhU4GXgYgoltmWJ
    IHhU4GXgYgoltmWJ
    xHiOMyBxtD3ok2of

    • Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router.

  4. OVfc6fhP31lWy4AP

    • Lift the bottom casing straight up from the router.

  5. jKCOiWqTaEXiEFpP

    • Remove the clear plastic casing by lifting it straight up from the router.

  6. RHQf2N3RXsLRB4VS
    RHQf2N3RXsLRB4VS
    EAsy5RJ1myghGC6x

    • Separate the motherboard from the top shell by lifting it straight up from the router.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Ryan Murphy

Membro da: 03/10/11

488 Reputazione

0 commenti