NuVision TM1088 Speaker Replacement

Scritto Da: Nathaniel Nasman
  • Commenti: 0
NuVision TM1088 Speaker Replacement

Difficoltà

Moderate

Passi

3

Tempo Necessario

15 minuti

Introduzione

Replacing the speaker on a NuVision TM1088 is a fairly simple process, but will require some soldering.

  1. YqYiMDYtev5Cp6cm

    • Place the plastic opening tool between the front and rear cover and pry up on each corner of the cover.

  2. INcLGVfXADkrerUv

    • Melt the solders with a heat gun and remove red and black wires.

  3. eSXNFmcROUsmLyoG

    • Peel the speaker off the rear cover. It is only held in by a small amount of glue.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Nathaniel Nasman

Membro da: 23/03/15

750 Reputazione

0 commenti