Oregon Scientific Meep! 4.0 Speakers Replacement

Scritto Da: Jess Forte
  • Commenti: 0
Oregon Scientific Meep! 4.0 Speakers Replacement

Difficoltà

Easy

Passi

4

Tempo Necessario

5 minuti

Introduzione

By following the steps below, you will be able to remove and replace the speakers of your Oregon Scientific Meep! 4.0.

  1. 6A2ymCnNeRClZVFu

    • Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.

  2. Gdlk6mGRgd4c64m6

    • Use a plastic opening tool to detach the clips on the inside of the device.

  3. 6TTgnBsmPjt5oFNS
    6TTgnBsmPjt5oFNS
    ErFuy4ZvLmPwPWZn

    • Remove the electric tape holding the wires of the speakers in place and gently pull the speakers out of their slots in the device.

  4. noB3gjiqXfWda6eZ
    noB3gjiqXfWda6eZ
    2MsFrY3E5cPJFGiN

    • Use a soldering station to separate the wires from the speakers.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Jess Forte

Membro da: 25/09/15

434 Reputazione

0 commenti