PSP 300xc Front Case Replacement

Scritto Da: Matthew Newsom
  • Commenti: 0
PSP 300xc Front Case Replacement

Difficoltà

Easy

Passi

6

Tempo Necessario

Nessuna stima

Introduzione

Make you PSP 3000c like new again by replacing your beat up front case with a shiny new one!

  1. dMxexFVO5hKaeSoA
    dMxexFVO5hKaeSoA
    y4pkNKXUgbAdXXTx

    • Press the button securing the battery door to the PSP 300xc, and lift the battery door off.

    • Lift the battery out of the PSP.

  2. HtYqmm6r2DnKdSOR

    • Use a spudger or your fingernail to remove the warranty sticker stuck to the inside of the battery tray

  3. GN3N2ouHTJ5TLa32
    GN3N2ouHTJ5TLa32
    giUAkamN6ArnAjWQ

    • Remove four Phillips screws from the back of the PSP.

  4. jqa3qTlstcGShOa2

    • Remove two Phillips screws from the top of the PSP.

  5. MdwSrnGmrVaL3yLh

    • Remove a single screw from the bottom edge of the PSP.

  6. E1pbftHYLhTmXGOs
    E1pbftHYLhTmXGOs
    nN6mwd2XfheB2aqN

    • Insert a spudger between the front case and PSP, and slide the spudger along the perimeter of the front case to remove it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Matthew Newsom

Membro da: 06/01/10

39426 Reputazione

0 commenti