Palm Tungsten E2 Battery Replacement

Scritto Da: MacWiniac
  • Commenti: 0
Palm Tungsten E2 Battery Replacement

Difficoltà

Moderate

Passi

8

Tempo Necessario

15 minuti

Introduzione

    • Open the 4 screws on the back

    • With a spudger open the case on the side

    • Pull the Connector Up

    • Remove the Battery with a plastic spudger

    • Insert the Connector straight downward

    • Put the battery in the same place, if necessary add glue to it

    • Close the case and tiden it with the screws

    • Completely load the battery and push the reset button.

    • Adjust date and time

Conclusione

Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.

Autore

MacWiniac

Membro da: 18/01/12

153 Reputazione

0 commenti