Photive Artisan Portable Bluetooth Speaker Front Panel Replacement

Scritto Da: David Lennon
  • Commenti: 1
Photive Artisan Portable Bluetooth Speaker Front Panel Replacement

Difficoltà

Moderate

Passi

6

Tempo Necessario

Nessuna stima

Introduzione

Use this guide to open up your speaker and remove and replace different components under the front panel.

  1. DqROGVTR3ndYnYQW

    • Before continuing, be sure your device is powered off.

    • Remove two 9mm Phillips #0 head screws from the bottom side of the speaker.

  2. Ar6k2scJSHm43Nie

    • Peel back the rubber feet from either side of the base.

  3. ATLgVcgFJoV5Pejy

    • Remove four 9mm Phillips #0 head screws from the bottom of the speaker.

  4. SRZ6UCHTDa12TCDB

    • Separate the base of the speaker from the upper housing.

  5. PdZOMssvgUvJN3eu

    • Remove four 9mm Phillips #0 head screws from the inside of the speaker case.

  6. UVYVvxpxUVrkIFKT
    UVYVvxpxUVrkIFKT
    O2KJcUa2GMICwngL
    xBUNPPyYuwigm5jH

    • Remove all cable connectors from the speaker motherboard.

    Emerson speaker Battery pack size

    Dion -

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

David Lennon

Membro da: 14/04/15

9944 Reputazione

0 commenti