Introduzione

If you need to replace the film door latch, use this guide to access the inside of the camera. You may need to replace the latch if your camera will not close.

  1. U6SnnAINsJKmJN6A
    U6SnnAINsJKmJN6A
    VUFrcFVrDQeGHENn
    • Unscrew the four 5mm screws on the base of the camera using a Phillips #0 screwdriver.

  2. rSDSqYdW5FTXbaIl
    • Remove the bottom of the base and piece containing the film door latch.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Abby Boucher

Membro da: 10/09/18

811 Reputazione

2 commenti

This doesn’t actually say anything about replacing the latch…

austin.ranson -

But where do you buy a replacement latch?

Graceann Conn -