Power Macintosh G3 Blue and White RAM Replacement

Scritto Da: [deleted]
  • Commenti: 1
Power Macintosh G3 Blue and White RAM Replacement

Difficoltà

Easy

Passi

3

Tempo Necessario

4 - 6 minuti

Introduzione

My RAM configuration may differ from yours, but the process is exactly the same.

  1. 3oJiC1RKZ6gBVK4h

    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals of the Power Mac.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

    Don't forget to unplug the power and any other cables before opening the case.

    charles strang -

  2. YR1MZDRPPrPGtGcq

    • Push the white tabs next to where your RAM is located away form the RAM chip itself.

    • The RAM chips should move up a tad and become somewhat loose.

    • Your RAM configuration may vary. This process is done the exact same way no matter what your RAM placement looks like.

  3. OTM6NTcvbUunDZCX
    OTM6NTcvbUunDZCX
    jCnAHBTIa43SQhGc

    • Pull the RAM chips out of the RAM slots.

    • That's all folks! That wasn't too hard, was it?

    • Second image: RAM remains

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

[deleted]

Membro da: 28/08/18

26295 Reputazione

0 commenti