RCA 10 Viking Pro RCT6K03W13 Backplate Replacement

Scritto Da: Ryan Wickett
  • Commenti: 1
RCA 10 Viking Pro RCT6K03W13 Backplate Replacement

Difficoltà

Easy

Passi

4

Tempo Necessario

5 minuti

Introduzione

  1. BQ2AWdrxZSoSTYKv
    BQ2AWdrxZSoSTYKv
    PnlAaXBUEvbNyFOl
    1YjWXN1I3HRcPbVP

    • Remove the three Phillips #00 screws at the bottom of the device.

  2. Er6DELMh1SdNZUTK
    Er6DELMh1SdNZUTK
    cGtDxPqJjbpxLjiA

    • Remove the two Phillips #00 screws to the left and right of the keyboard connector.

  3. ChyRCHWYdAp5rkYT

    • Pull on one of the bottom corners to begin to pull off the back plate.

  4. imfYCjACjMCbXC2A
    imfYCjACjMCbXC2A
    TFtmFvOOeLVOXtns

    • Work around the outside of the chassis, using the spudger to pry the backplate off.

    • After doing this for about half the device, the backplate should pop right off.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Ryan Wickett

Membro da: 25/10/19

632 Reputazione

Un commento

muy bueno me sirvio

william algara -