Razer Blade 15" (2020) Back Cover Replacement

Scritto Da: Clay Eickemeyer
  • Commenti: 0
Razer Blade 15" (2020) Back Cover Replacement

Difficoltà

Moderate

Passi

3

Tempo Necessario

5 - 10 minuti

Introduzione

Use this guide to remove or replace the back cover on your Razer Blade 15" (2020) laptop.

  1. QXKNhOgcEdB4IAhI

    • Use a T5 Torx driver to remove the ten 3.7 mm-long screws securing the back cover.

  2. PtFV26uPOrRw6VEB
    PtFV26uPOrRw6VEB
    RPkJusFBRyHjqORY
    MQPnpZujtwdxhPmD

    • The back cover is lightly secured to the motherboard by thermal pads. Depending on the age of your laptop, it may be easier or harder to remove.

    • Use a finger to pry up the right side of the back cover, starting at the Ethernet port cutout.

  3. 1PtL256PRaO4CCSV
    1PtL256PRaO4CCSV
    CAEGXRyIgRVAICOA
    VbZXUqMHEAQwIOx2

    • Remove the back cover slowly, as to avoid tearing the thermal pads underneath.

    • Lay the back cover down on its rubber feet to avoid damaging the thermal pads on its underside.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Clay Eickemeyer

Membro da: 19/09/22

64976 Reputazione

0 commenti