Introduzione
Un hard drive in un vecchio computer 486 contiene dati che si ritengono importanti. Il computer ha solo un floppy drive da 3.5''. Il "nuovo" computer (Mac G4) non ha un floppy drive. Il vecchio PC non ha porte di trasferimento. Questa guida offre una soluzione.
-
-
Problema: come spostare i dati di un HD da un vecchio PC 486 privo doi moderne prote di trasferimento a un computer più recente. Soluzione: rimuovi l'hard drive dal vecchio PC e collegalo a un case esterno per HD dotato di una connessione adatta al computer sul quale vuoi spostare i dati.
-
Per riassemblare il tuo dispositivo, segui queste istruzioni in ordine inverso.
2 commenti
Do you have fix on how to move floppy disk data to a usb or other hdd?
The Adapter In question would be called An IDE to USB connection with an independent external power supply for the hard drive. IDE is also knows as PATA (Paralell ATA) it is an older standard but as long as the Old HDD is not damaged or corrupted then it should transfer the data just fine to a new computer or Directly to another drive. Some adapters will have a combined SATA and IDE connector for both types of hard drives.
Always make sure to do your research on each model of computer before you tear it down or remove HDDs from them to avoid damage or injury. Also In answer to the other question there are Floppy Disk to USB drives available that can be used in a similar manner to the aforementioned adapter above. There may be additional emulation software needed for those to work but that will be dependent on the devices themselves if they do not have a standard windows driver available for modern computers.
I also would not recommend Doing any electronics repair on carpeted floors.