Removing the Ink Cartridge Rail

Scritto Da: Justin Taiki Fukada
  • Commenti: 0
Removing the Ink Cartridge Rail

Difficoltà

Moderate

Passi

2

Tempo Necessario

Nessuna stima

Introduzione

  1. KKsXcaC2ECCUOrTA
    KKsXcaC2ECCUOrTA
    RHOZpwBlMdiJNINL

    • Remove the five 13.0 mm Torx #10 screws found on top of the frame.

    • Remove the four 9.0 mm Torx #10 smaller screws.

  2. VmuRxqSClj6HvTkr
    VmuRxqSClj6HvTkr
    bj3Zb5j3P2YafJYK

    • Lift the rail carefully as a strip and motor will be connected to the bottom part of the printer.

    • Now detach the white strip and wires by gently lifting them up.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Justin Taiki Fukada

Membro da: 25/01/14

870 Reputazione

0 commenti