Replacement Motor for Dexter UP20 Angle Grinder

Scritto Da: Céline Chemineau
  • Commenti: 0
Replacement Motor for Dexter UP20 Angle Grinder

Difficoltà

Moderate

Passi

5

Tempo Necessario

10 minuti

Introduzione

  1. Remove the battery and the protective casing.

    • Remove the battery and the protective casing.

  2. Unscrew and remove the Grinding Head.

    • Unscrew and remove the Grinding Head.

  3. Remove the screws from the shells to gain access to the internal components.

    • Remove the screws from the shells to gain access to the internal components.

  4. Remove the faulty motor.

    • Remove the faulty motor.

  5. Place the new motor back into the tool.

    • Place the new motor back into the tool.

Conclusione

To reassemble your device, follow the instructions in reverse order.

Autore

Céline Chemineau

Membro da: 29/01/20

16554 Reputazione

0 commenti