Replacing Sanyo VPC-X1200 Rear Buttons

Scritto Da: Anthony Giardina
  • Commenti: 0
Replacing Sanyo VPC-X1200 Rear Buttons

Difficoltà

Easy

Passi

3

Tempo Necessario

5 minuti

Introduzione

This is an easy guide to replacing the rear buttons on the Sanyo VPC-X1200.

  1. nWWunZCYDCOM4Tun
    nWWunZCYDCOM4Tun
    cWFjUCjaMKVyKjTR
    INNm3vJGe4yW3cNa

    • Remove the five case screws with a Phillips #00 Screwdriver.

    • Five 3.5mm Phillips Screws

  2. 3fs5LCDPf5yjEOMx

    • Gently lift up the back cover and set aside.

  3. tSoSlJxFsSNxEcfM

    • Use small plastic pry tool to gently remove rear button plate.

    • A heat gun may be used to soften the glue for easier removal.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Anthony Giardina

Membro da: 19/04/10

20 Reputazione

0 commenti