Ridgid R2611 Hook and Loop Backing Pad Replacement

Scritto Da: Luke Stokes
  • Commenti: 0
Ridgid R2611 Hook and Loop Backing Pad Replacement

Difficoltà

Easy

Passi

3

Tempo Necessario

5 minuti

Introduzione

The hook and loop can wear down over time, which is completely normal due to constant use. The replacement parts for this guide can be easily purchased.

  1. 3eNeKnjQHYbkrmXS

    • Flip the sander on its side to expose the bottom.

  2. GCbpJmJkOgNeHDRg

    • Remove the four 2.5 mm Phillips #1 screws with the flathead screwdriver.

  3. jL6mZKt6QMRpfyHg

    • Remove the hook and loop backing pad from the sander.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Luke Stokes

Membro da: 16/01/19

464 Reputazione

0 commenti