Ryobi P277 Reversing Switch Replacement

Scritto Da: Kailyn Hammond Gouch
  • Commenti: 0
Ryobi P277 Reversing Switch Replacement

Difficoltà

Easy

Passi

2

Tempo Necessario

3 minuti

Introduzione

This guide will instruct the user on replacing the reversing switch on the Ryobi P277.

  1. DePP42JruWYImlxA
    DePP42JruWYImlxA
    DEMhWfyLPFYkDqem

    • Lay the device on its side.

    • Remove eight 5 mm screws using a TR10 Torx screwdriver.

    • Separate the two halves by pulling up on the top half.

    • The two halves are still attached, so use caution when opening the device.

  2. J2tbBE4cVJfYcENM

    • The reversing switch lies between the trigger and the motor.

    • Carefully remove the reversing switch from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Kailyn Hammond Gouch

Membro da: 08/03/23

85 Reputazione

0 commenti