Ryobi P277 Speed Selector Switch Replacement

Scritto Da: Owen Dismukes
  • Commenti: 0
Ryobi P277 Speed Selector Switch Replacement

Difficoltà

Easy

Passi

2

Tempo Necessario

15 minuti

Introduzione

This guide will instruct the user on replacing the speed selector switch on the Ryobi P277.

  1. HNGAyJDaeZcXo4lx
    HNGAyJDaeZcXo4lx
    65fDfXJS6TjMVbdE

    • Lay the device on its side.

    • Remove eight 5 mm screws using a TR10 Torx screwdriver.

    • Separate the two halves by pulling up on the top half.

    • The two halves are still attached, so use caution when opening the device.

  2. QKb3vjlGyM6b1GfF

    • Carefully disconnect the speed selector switch from the metal bar and remove the switch.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Owen Dismukes

Membro da: 08/03/23

85 Reputazione

0 commenti