Introduzione
Strumenti
- 
                  
                  
- 
            
Remove the back panel of the device by taking out the seven screws on the back panel of the device.
 - 
            
Four of the screws are under the rubber feet so they will need to be removed. To remove the feet, pry them off with the spudger.
 
 - 
            
 - 
                  
                  
- 
            
Locate the wireless card. It is shown highlighted in picture one.
 - 
            
Detach the black and white cords connected to the wireless card and unscrew the screw holding in the card. They are shown highlighted in picture two.
 - 
            
Pull the card out of its slot and insert the new card. Reattach the wires and reassemble the device. Note: the white wire connects to the terminal closer to the screw and the black to the other terminal.
 
 - 
            
 
                            
                            Conclusione
                          
                          To reassemble your device, follow these instructions in reverse order.