Introduzione
If your Samsung Captivate is not connecting to the network, one problem could be a faulty antenna cable. Replacing this part is very simple and can be accomplished by anyone.
Strumenti
- 
                  
                  
- 
            
Remove the back cover by pressing on the bottom section of the phone and sliding the bottom piece downward.
 - 
            
Lift up the back cover.
 
 - 
            
 - 
                  
                  
- 
            
Insert the spudger underneath the bottom section of the phone.
 - 
            
Gently lift and push the spudger to slide the bottom section down to reveal two hidden screws.
 
 - 
            
 - 
                  
                  
- 
            
Starting at a bottom corner, use the spudger to separate the rear case from the front display.
 - 
            
Move the spudger towards the top on both sides. The plastic opening tool is easier to use for this step.
 
 - 
            
 - 
                  
                  
- 
            
Use a spudger tool to pry up the antenna cable from the connector on the motherboard.
 - 
            
Pry up the other end of the cable from the connector on the antenna array.
 
 - 
            
 
To reassemble your device, follow these instructions in reverse order.
2 commenti
Quick question, is this the antenna for wifi or cellular network?
This is actually just the cable that connects the motherboard to the antenna array. I believe the antenna array that it connects to is for WiFi though.