Introduzione
The speaker is easily damaged by playing music too loud. This part is easily replaced.
Strumenti
- 
                  
                  
- 
            
Remove the back cover by pressing on the bottom section of the phone and sliding the bottom piece downward.
 - 
            
Lift up the back cover.
 
 - 
            
 - 
                  
                  
- 
            
Insert the spudger underneath the bottom section of the phone.
 - 
            
Gently lift and push the spudger to slide the bottom section down to reveal two hidden screws.
 
 - 
            
 - 
                  
                  
- 
            
Starting at a bottom corner, use the spudger to separate the rear case from the front display.
 - 
            
Move the spudger towards the top on both sides. The plastic opening tool is easier to use for this step.
 
 - 
            
 - 
                  
                  
- 
            
Use the Phillips 00 screwdriver to remove the single screw holding the speaker assembly to the LCD.
 
 - 
            
 - 
                  
                  
- 
            
Pull out the ribbon cable.
 - 
            
Use a spudger or plastic opening tool to lift up the speaker, and use your hands to remove it.
 
 - 
            
 
To reassemble your device, follow these instructions in reverse order.
Un commento
It was clear enough to follow, don't know why it got the incorrect text caveat.
I gotta get one of those spudger sets.
Also it did not say where to get the actual replacement speaker.