Samsung Exhibit II 4G Midframe Replacement

Scritto Da: David R
  • Commenti: 0
Samsung Exhibit II 4G Midframe Replacement

Difficoltà

Easy

Passi

10

Tempo Necessario

3 - 6 minuti

Introduzione

Use this guide to replace a damaged midframe.

  1. OEkY5WJitYct5LVl

    • Insert plastic opening tool under back cover.

    • Apply pressure on tool while using a downward motion to pop off back cover.

  2. BU3VdXXvJhiAwfvA

    • Insert plastic opening tool under battery.

    • Pry battery out.

  3. KPCUytEe4OQKAOYm

    • Insert plastic opening tool under back cover.

    • Pry the top cover upward to remove it from the phone.

  4. AG2mksjLDsaP3gMu

    • Remove the top cover.

  5. tjHFsSmEFHaUdTqK
    tjHFsSmEFHaUdTqK
    okgWJFWJYjRdL2DT

    • Remove the four 3.8mm Phillips #000 screws securing the top cover to the back assembly.

    • Two screws from top and two screws from back.

  6. kBmeDjPkG6d14Z6Q
    kBmeDjPkG6d14Z6Q
    WjKQVynKIcCMYEjU
    BonkngaYWRRLrTOo

    • Insert plastic opening tool under top cover.

    • Using hand slide top cover away from phone.

  7. rWPFHPKDONTiWWkC

    • Remove the four 3.8mm Phillips #000 screws securing the back assembly to the phone.

  8. p1jYnUJXTMxH1Awj

    • Insert plastic opening tool between back assembly and phone.

    • Pry the back assembly away from phone.

  9. KNPqH3WLf4r4AFZP

    • With plastic opening tool continue prying around the edge of the back assembly.

  10. 4ESoHY5QmBG63aDv

    • Pull back panel assembly away from main body.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

David R

Membro da: 20/07/15

1152 Reputazione

0 commenti