Samsung Galaxy J7 V Motherboard Replacement

Scritto Da: Jesse Cullen
  • Commenti: 0
Samsung Galaxy J7 V Motherboard Replacement

Difficoltà

Moderate

Passi

10

Tempo Necessario

7 minuti

Introduzione

Use this guide to restore your Samsung Galaxy J7 V to working order with a motherboard replacement. This guide covers steps for replacing a motherboard by going through how to get under the screen, removing the front panel, the home button, and the battery of the phone to get to the motherboard itself.

  1. SWCCYVMaPDJeHSMr

    • Be very careful during this step. The OLED (organic light-emitting diode) display is very fragile and can break easily.

    • Insert a Jimmy tool under one of the corners of the display and gently raise the display.

  2. lfWslMk4m1X5ADif

    • Gently slide the Jimmy tool around the entire perimeter of the phone.

  3. V6syNQqjG3fmieew

    • Be extra careful with the display's ribbon cables. They are fragile.

    • Carefully lift the display to remove it.

  4. B4TW1EdEWSfmhf1N

    • Locate the socket of the home button.

    • Fit the metal spudger in between the socket and the home button.

  5. stJgs6mIjwhfkmDA

    • Take the metal spudger and slide it underneath the home button.

    • Lift up until the home button is removed from its socket.

  6. so2QGloTTbtqQD2t
    so2QGloTTbtqQD2t
    BhUS2kN3OFZePX1a

    • Use the indent on the right side of the phone to lift up the backing

    • With the phone faced downwards, remove the backing of the case, lifting up from the right side

  7. Pq2P15rSMaISCsQS

    • Carefully remove the battery by lifting the bottom side, and then fully remove the battery

  8. lEoiqjyZoNOeLeWM

    • Remove fourteen screws from the midframe using a Phillips #00 screwdriver.

  9. ipB1URcRfQRSHiq6

    • Flip the phone to the back side where the battery was removed.

    • Apply pressure with your hands to pop the midframe off.

  10. kiVEPCXiuKHThLYh
    kiVEPCXiuKHThLYh
    1hYHhghxlBnttQAR

    • Flip the phone back over.

    • Remove the single black screw from the motherboard using a Phillips #00 screwdriver.

    • Place a few iFixit opening picks beneath the motherboard.

    • Spread the opening picks evenly around the motherboard to ensure it does not bend as you remove it.

    • Lift the motherboard using the iFixit opening picks.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Jesse Cullen

Membro da: 08/02/22

106 Reputazione

0 commenti