Samsung Galaxy Note 3 Rear Facing Camera Replacement

Scritto Da: Brittany Gail
  • Commenti: 8
Samsung Galaxy Note 3 Rear Facing Camera Replacement

Difficoltà

Moderate

Passi

10

Tempo Necessario

Nessuna stima

Introduzione

This guide shows how to replace the camera.

  1. 2X5Sv5NwiHI6Sm1W

    • Insert a fingernail or plastic opening tool in the gap between the rear case and the base of the phone.

  2. fmuZpZC5KXkPOGJX
    fmuZpZC5KXkPOGJX
    LNoSjeEVytKaKMOE

    • Slide your fingernail or plastic opening tool along the edge of the rear case.

    • Lift the case gently from the base.

    Why... is it not simple enough already lol

    Adam Ahmed -

  3. 5qhKihhyNLlLmuJa
    5qhKihhyNLlLmuJa
    yIJGSFvvLAMfY3m2

    • Insert a fingernail or plastic opening tool into the small gap between the battery and the phone base.

    • Lift the battery out of its recess.

  4. mvkenRCOx6cAFqP4

    • Place your fingernail in the groove of the stylus pen.

    • Pull the stylus pen away from the phone.

  5. IvpCPaUlVCvxSgmX

    • Remove the twelve 4mm Phillips #00 screws from the back chassis.

  6. CgIWZRIwgssvqW4O

    • Insert the plastic opening tool into the Stylus Pen placement holder.

    • Lift the plastic opening tool so that the midframe separates from the base.

  7. fKjasIkj5m4nYTLC
    fKjasIkj5m4nYTLC
    MPFelWmeGRNlYvFg

    • Remove the single screw beside headphone jack.

    You can skip this step, it is usseles as this screw doesn’t attach the mother board at all

    Oriol Felisart -

  8. vB3KF3bVDPnUQURP
    vB3KF3bVDPnUQURP
    OAgtEjrprOKwZQsk

    • Use tweezers to remove both antenna clips.

    • Use a spudger to disconnect six cable connectors.

  9. HCSDwgNbIkJnMIp4

    • Pull up on the motherboard with tweezers.

    Can i change at&t board to 9002 or 9005??,

    Ayyaz -

    My mother board is not working what should I do I can't use Bluetooth, WiFi,hotspot or insert sim

    soha Javed -

    My wifi hotspot is not working

    Kiran Thopate -

  10. WGUUIxUHgsEHdFBK

    • Unclip the camera connecting cable using the plastic opening tool from the motherboard

    • Remove loose camera from base

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Brittany Gail

Membro da: 23/09/14

8504 Reputazione

3 commenti

Awesome, phone disassembly and fingernail painting at same time :) Thanks for your time to post this!

Chris G -

Hi

Thanks for the nice instructions

Do you know if I can use a Note 4 camera (or any better!) for my Note 3?

Are they different in connections?

Thanks

hameidfehri -

I shall be very thankfull for this act of kindness

Malik wajdan ali -