Samsung Galaxy S Blaze Volume Rocker Replacement

Scritto Da: Jake Best
  • Commenti: 0
Samsung Galaxy S Blaze Volume Rocker Replacement

Difficoltà

Easy

Passi

5

Tempo Necessario

25 - 45 minuti

Introduzione

This guide will allow any user of the Samsung Galaxy S Blaze to properly replace the volume rocker. Replacing the volume rocker in a Samsung Galaxy S Blaze is an easy process with no surprises.

Keep in mind to be careful while handling the screws for the phone, as they will damage easily.

  1. LuUYgBikeugvdTgE

    • Start by removing the back plate to expose the battery by pulling the back and front plates apart.

  2. OOiZ6fsniFmynBQI

    • Remove the battery from the device and set aside.

  3. GVDMd3PxTapWrgST
    GVDMd3PxTapWrgST
    4bKSXGNuP1bIiDHd

    • Using a Phillips Head Screwdriver size 00. Remove all eight 4mm screws from the frame.

    • The eight screws are all the same size.

  4. jrITkQMEcQQPBW4J

    • Remove the frame from the phone by prying it off with the iFixit blue plastic opening tool.

    • Work around the phone with the tool until the frame is off.

    • You may need to use a bit of force to pry off the frame.

  5. TECeHcvgfeMS1jmV
    TECeHcvgfeMS1jmV
    DmOTKEefrRhyhdUP

    • The volume rocker is held into the frame by two small prongs.

    • Carefully unhook the prongs from the frame by pulling to the side and remove the volume rocker.

    • The prongs on the volume rocker look like this.

Conclusione

To reassemble your device, follow these instructions in reverse order.

If there is something wrong with your device, try this: Samsung Galaxy S Blaze 4G Troubleshooting

Autore

Jake Best

Membro da: 05/03/15

261 Reputazione

0 commenti