Samsung Galaxy S III Motherboard Assembly Replacement

Scritto Da: Walter Galan
  • Commenti: 9
Samsung Galaxy S III Motherboard Assembly Replacement

Difficoltà

Moderate

Passi

6

Tempo Necessario

Nessuna stima

Introduzione

Prereq only.

  1. 3rBkMVM1mGrkG2Yp

    • Use a plastic opening tool to pry the front-facing camera connector from its socket on the motherboard.

    • Do not try to remove the front-facing camera just yet. Its cable is still routed beneath the motherboard assembly to the ambient light sensor.

  2. AqfTuXGDQjbGBW3I
    AqfTuXGDQjbGBW3I
    LTnNOpvcphSJvPcx

    • Disconnect the digitizer cable by gently prying its connector up from its socket on the motherboard.

    Step 18 says the front digitizer connector, but later calls it the earpiece/buttons/ambient light sensor ribbon cable.

    Is the Digitizer connector part of the display connector, or is it elsewhere?

    Kyle Mattfield -

    It's the volume and speaker

    Joel Muhong -

  3. e2DLZV4VKTPHEUOY
    e2DLZV4VKTPHEUOY
    6wqTFNb1n6gxD6rx

    • Disconnect the display data cable from the motherboard.

  4. mSYindfoh1bvXbW4
    mSYindfoh1bvXbW4
    RH1x4BcCUxuUiVAr
    ZaFXCh362aEdiITJ

    • Pry the Wi-Fi antenna cable connector up from its socket on the motherboard.

    • Gently move the cable out of the way of the motherboard.

    Be very careful,as it is very easy to break the connector off the motherboard.

    vjmickelson -

    Has anyone tried just folding the motherboard back to the left after removing all the screws WITHOUT disconnecting the wi-fi antenna? I'm just a little worried about this one step.

    Cullen Johnson -

    Folding the motherboard back without disconnecting the WiFi antenna worked for me! :)

    Alec -

    I broke the WiFi antenna connector bit off motherboard. How do I fix it?

    rileygoldsmith -

  5. mMV6LKr2eNWLx3M2

    • Remove the single 3.0 mm Phillips screw securing the motherboard to the front panel assembly.

  6. FfGWodALwcSeysW5
    FfGWodALwcSeysW5
    bAiUEx2fJgmgcRGR

    • Carefully lift the bottom of the motherboard assembly away from the front panel assembly.

    • Remove the motherboard assembly from the front panel assembly, minding any cables that may snag on it.

    When reassembling your device, there can be a problem with connecting display data cable to the motherboard. I fixed display data cable on the motherboard before mounting motherboard: it gave me some freedom and simplified positioning of data cable on the motherboard

    fomondik -

    If I am not mistaking, there is a screw also on the motherboard needs to be removed before removing motherboard from the assembly

    blingblingyourlink -

    It's covered in Step 21

    Amy Losh -

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Walter Galan

693768 Reputazione

0 commenti