Introduzione
Strumenti
- 
                  
                  
- 
            
Flip your phone so you are facing the back.
 - 
            
Locate the notch at the top and gently use your finger or an opening tool to remove the rear casing.
 
 - 
            
 - 
                  
                  
- 
            
Use the Phillips #000 Screwdriver to remove the 10, 4mm screws holding the plastic frame in place.
 
 - 
            
 - 
                  
                  
- 
            
Unhook the two electrical connections at the bottom of the phone using your fingernail or a spudger.
 - 
            
Next, use the spudger and tweezers to remove the speaker at the top of the phone.
 - 
            
Once the 3 components have detached, the circuit board should release from the phone except for 1 connection on the underside.
 - 
            
Detach this connection using the spudger.
 
 - 
            
 
                            
                            Conclusione
                          
                          To reassemble your device, follow these instructions in reverse order.