Introduzione
This guide shows how to remove and replace the control board in your Samsung RF28R7201SG refrigerator.
The control board controls the refrigerator's functions. It also has a DC power board built into it. If your refrigerator turns on but doesn't function properly, check the components related to the function first. Replace the control board only after you've verified the other components.
Strumenti
-
-
Use a Phillips screwdriver to remove the five screws securing the board access panel to the back of the refrigerator:
-
Four 14.8 mm-long screws
-
One 12.3 mm-long screw
-
-
-
Three connectors along the top edge
-
One connector along the right edge
-
One connector along the bottom edge
-
Four connectors along the left edge
-
-
-
Pull and disconnect each of the nine connectors from the control board.
-
Move the wires away from the control board so it can slide out of its recess.
-
-
-
Use your fingers to push up the plastic lip securing the top edge of the control board to the refrigerator.
-
Swing the control board out and remove it.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
