Introduzione

This guide shows how to remove and replace the control panel in your Samsung RF28R7201SG refrigerator.

The control panel contains the buttons to change the refrigerator settings, as well as a display for current settings. The panel can become damaged and inoperative from prolonged moisture exposure.

  1. SaOfLbkeAxgmho5g
    • Unplug your refrigerator before you begin your repair.

  2. O2XGt1FbR2wqssVR
    O2XGt1FbR2wqssVR
    L5gfkBAXIADyme3l
    • Open both French doors for the refrigerator compartment.

  3. OUQEkpeMwX3ch5nI
    OUQEkpeMwX3ch5nI
    DEUf3tHNA2xwWW6U
    wBTwdRtIDKECfuJ2
    • The control panel has plastic clips around its perimeter that secure it to the refrigerator wall.

    • Insert a spudger into the seam along the right edge of the control panel.

    • You can also use a flathead screwdriver, but be careful not to let the screwdriver slip, or you'll scratch your refrigerator surface.

    • Press the spudger in firmly and pry to loosen the panel.

    • Use your spudger to slide and pry around the control panel to loosen it from the refrigerator wall.

  4. cGETeNkSaVT44WT3
    • Flip the control panel over to reveal the cable connector.

  5. pESW152yDTjpjH2r
    pESW152yDTjpjH2r
    FowRbN61AMsNCsNK
    • Use your fingers to slide the cable connector out of its socket.

  6. yp2Z6Kd13oiArIce
    • Remove the control panel.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

nicO

Membro da: 14/04/15

15885 Reputazione

0 commenti