Introduzione

Prereq guide to remove the refrigerator evaporator cover.

  1. SaOfLbkeAxgmho5g
    • Unplug your refrigerator before you begin your repair.

  2. O2XGt1FbR2wqssVR
    O2XGt1FbR2wqssVR
    L5gfkBAXIADyme3l
    • Open both French doors for the refrigerator compartment.

  3. EZ1pcx3sRXWP5OmZ
    EZ1pcx3sRXWP5OmZ
    KSCZFQWUTJMhLEZO
    • Remove all the loose shelves and bins from the refrigerator compartment.

    • The bottom shelf is clipped in place. Follow the next step to remove it.

  4. ncCDecLMOiqwRlDA
    ncCDecLMOiqwRlDA
    x3hVWFLnaXhGByxL
    lOUYFLy52ICUKRyR
    • Two stiff plastic tabs (one on each side) secure the bottom shelf in place.

    • Press both plastic tabs firmly with your fingers and lift upward to unclip the bottom shelf.

    • If the shelf doesn't unclip, you can try using a flathead screwdriver to press each clip in.

    • Remove the bottom shelf.

  5. XeJcGVxpbG1bXROm
    XeJcGVxpbG1bXROm
    3osilVrkkDwHykuk
    lAORpBvWcLnl2XhV
    • Use a flathead screwdriver to pry and remove the top screw cover on the evaporator cover.

  6. pedZPwOTGOCjtBEo
    • Use a Phillips screwdriver to remove the four screws securing the evaporator cover:

    • Two 37 mm-long screws

    • Two 16.5 mm-long screws

  7. rngXuZCPImQScTVw
    rngXuZCPImQScTVw
    w1cnHpjLvQ5cdtcD
    tMKZ3cEVSftCFHHY
    • Grasp the right edge of the evaporator cover with your hands and swing it outwards toward you.

    • Don't try to fully remove the cover in this step, as it's connected by several wires.

  8. 2LvrUGYhYkNTHJMI
    • Squeeze and disconnect the two wire connectors connecting the evaporator cover to the refrigerator.

  9. N2c1y1McoTuqPOAT
    N2c1y1McoTuqPOAT
    uT5K6IJUesPN3AtK
    • Pull the evaporator cover towards you and remove it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Membro da: 03/01/18

248264 Reputazione

0 commenti