Samsung Refrigerator Control Board Replacement

Scritto Da: Bill Gilbert
  • Commenti: 0
Samsung Refrigerator Control Board Replacement

Difficoltà

Moderate

Passi

6

Tempo Necessario

10 - 20 minuti

Introduzione

This guide shows how to remove and replace the control board in your Samsung refrigerator.

The control board controls the refrigerator's functions. It also has a DC power board built into it. If your refrigerator turns on but doesn't function properly, check the components related to the function first. Replace the control board only after you've verified the other components.

This guide will work for most Samsung Refrigerators . This guide is based on a model RF28R7201SG Refrigerator. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.

  1. SaOfLbkeAxgmho5g

    • Unplug your refrigerator before you begin your repair.

  2. nUhO3XsifrZKIkyo

    • Remove the screws securing the board access panel to the back of the refrigerator.

  3. LR3pImLDmApaX1qW
    LR3pImLDmApaX1qW
    CiRF2NR64WpBinBm

    • Remove the board access panel.

  4. AHBfQQAJoFsaDPdo
    AHBfQQAJoFsaDPdo
    vgQIa2NeBiGTkHsB

    • Note the locations and number of the connectors on the control board, and photograph them or draw a diagram. This example control board has nine wire connectors:

    • Three connectors along the top edge

    • One connector along the right edge

    • One connector along the bottom edge

    • Four connectors along the left edge

    • During reassembly, use your diagram or the photo you took (like the second image here) to make sure you've reconnected all of the connectors.

  5. wavPFo5KPcMSNu2J
    wavPFo5KPcMSNu2J
    yBuG1UBWdxGaFsHf

    • Pull and disconnect each of the connectors from the control board.

    • Some connectors may have a locking tab. Squeeze the wide sides of the connector to unlock it, then pull to disconnect it.

    • Move the wires away from the control board so it can swing out of its recess.

  6. yby42VHcPtLQqQW1
    yby42VHcPtLQqQW1
    aEyyTIFeQYDsDLdV
    VuX52HhytDMLJ2Dq

    • Use your fingers to push up the plastic lip securing the top edge of the control board to the refrigerator.

    • Swing the control board out and remove it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers Community for help.

Autore

Bill Gilbert

Membro da: 30/06/22

29837 Reputazione

0 commenti