Samsung UBD-K8500 Disc Tray Replacement

Scritto Da: Aashishpal Reddy Kandala
  • Commenti: 0
Samsung UBD-K8500 Disc Tray Replacement

Difficoltà

Very easy

Passi

5

Tempo Necessario

10 - 15 minuti

Introduzione

This guide will help you replace the disc tray for the Samsung UBD-K8500. If the disc tray is damaged or overheating, we need to replace it.

  1. Z51FWrA6FHNKHlVU
    Z51FWrA6FHNKHlVU
    nxLgpk4DFxYjoUdd

    • Remove the six 10 mm screws from the back of the unit using a Phillips #0 screwdriver.

  2. M1N4CXO1K246QLFf
    M1N4CXO1K246QLFf
    Wf1eLJ1drhOgfktx

    • Carefully lift up the top panel.

    • There is a cables that must be disconnected before completely removing the panel.

    • Detach the cable connecting the top panel to the motherboard.

    • Take the top off and set it to the side.

  3. wbNg1sjEhq1Ut3Iw
    wbNg1sjEhq1Ut3Iw
    IWKXVrUpYGhxa6YE

    • Find the blue tabs of the ribbon connectors, and gently pull them both out.

  4. HQBWDL3cNpGGnwWO
    HQBWDL3cNpGGnwWO
    l5SMFJJYwQFT1tQN

    • Remove the four 8 mm screws from the disc drive using a Phillips #0 screwdriver.

  5. 2i3DJTYLAGhXxNjy
    2i3DJTYLAGhXxNjy
    XpDYDWAlXXFlakmo

    • Gently remove the disc tray.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Aashishpal Reddy Kandala

Membro da: 12/09/23

97 Reputazione

0 commenti