Samsung UBD-K8500 Power Supply Board Replacement

Scritto Da: Ryan Muscove
  • Commenti: 0
Samsung UBD-K8500 Power Supply Board Replacement

Difficoltà

Moderate

Passi

5

Tempo Necessario

10 - 20 minuti

Introduzione

This guide will help you replace the power supply board in the Samsung UBD-K8500.

  1. Z51FWrA6FHNKHlVU
    Z51FWrA6FHNKHlVU
    nxLgpk4DFxYjoUdd

    • Remove the six 10 mm screws from the back of the unit using a Phillips #0 screwdriver.

  2. M1N4CXO1K246QLFf
    M1N4CXO1K246QLFf
    Wf1eLJ1drhOgfktx

    • Carefully lift up the top panel.

    • There is a cables that must be disconnected before completely removing the panel.

    • Detach the cable connecting the top panel to the motherboard.

    • Take the top off and set it to the side.

  3. cpdPWZypCqaEyyKP
    cpdPWZypCqaEyyKP
    HfNOydwmiJXxNqbM

    • Using your fingers, carefully pinch the clipping part of the two connectors and gently pull them out of their sockets.

  4. UPfcxEEcLepLeg2e
    UPfcxEEcLepLeg2e
    U4dM3dO4djIQAKCQ

    • Remove the four 7 mm screws from the power supply board using a Phillips #0 screwdriver.

  5. l6AtNMVSQha3oFsn

    • Gently remove the power supply board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Ryan Muscove

Membro da: 12/09/23

334 Reputazione

0 commenti