Samsung UBD-M8500 Fan Replacement

Scritto Da: Enrique Howell
  • Commenti: 0
Samsung UBD-M8500 Fan Replacement

Difficoltà

Moderate

Passi

7

Tempo Necessario

10 - 15 minuti

Introduzione


If you're encountering overheating issues or unusual noise from your Samsung UBD-M8500 Blu-ray player, it might be time to replace the internal fan using a Phillips #1 screwdriver head. The fan is a critical component responsible for maintaining optimal operating temperatures and ensuring the longevity of your device. This step-by-step guide will assist you in the seamless replacement of the fan.

  1. AIfUboDCpPR2dJaq

    • On the back of the device, remove the three 8.1 mm screws with a Phillips #1 screwdriver.

  2. W4yYPAHLyyMVEFPD

    • From the back lift the case of the device upwards then forward, releasing the clips from the front.

  3. bFYYkY4jmEyEdjDF

    • Using two fingers in a pinching motion, release the wire from the clip that is attached to the outer shell and disconnect it.

    • Do not pull on the wires.

  4. fgrSrOEHXMKXHWyi

    • Remove the cover of the device.

  5. mrFDVDaKmTyUdUyu
    mrFDVDaKmTyUdUyu
    YPeXHyEpQyeHNSUO

    • Remove the two screws on the back of the device, using a Phillips #1 screwdriver.

  6. bKKZ4Z3hbyNRtT1I
    bKKZ4Z3hbyNRtT1I
    TfSsrZwkGWKy5JCD

    • Grip the white fan connector and pull it directly out if its port.

  7. 4KyycWgPuYI2XYIi

    • Lift the fan out of the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Enrique Howell

Membro da: 23/08/23

401 Reputazione

0 commenti