Samsung UBD-M8500 Motherboard Replacement

Scritto Da: Enrique Howell
  • Commenti: 0
Samsung UBD-M8500 Motherboard Replacement

Difficoltà

Moderate

Passi

7

Tempo Necessario

30 - 45 minuti

Introduzione


If you're experiencing persistent performance issues or malfunctions with your Samsung UBD-M8500 Blu-ray player, a faulty motherboard might be the culprit. This step-by-step guide is crafted to assist you in the seamless replacement of the motherboard using a Phillips #1 screwdriver, a critical component that orchestrates the functions of your device. By following these straightforward steps, you can rejuvenate your Blu-ray player's performance.

  1. AIfUboDCpPR2dJaq

    • On the back of the device, remove the three 8.1 mm screws with a Phillips #1 screwdriver.

  2. W4yYPAHLyyMVEFPD

    • From the back lift the case of the device upwards then forward, releasing the clips from the front.

  3. bFYYkY4jmEyEdjDF

    • Using two fingers in a pinching motion, release the wire from the clip that is attached to the outer shell and disconnect it.

    • Do not pull on the wires.

  4. fgrSrOEHXMKXHWyi

    • Remove the cover of the device.

  5. hSkYSW5QRfBxTIXk
    hSkYSW5QRfBxTIXk
    bFFjdWhH221D1AlU

    • Remove the two ribbon cables from the motherboard.

    • Be careful while doing so because they are fragile.

  6. Kw4ElyLkVG1eygkS
    Kw4ElyLkVG1eygkS
    2wPrOIQcRY4RdFJm
    1yIMCvmDLZEtkpy4

    • Remove the three cables on the left side.

  7. C1UhRsR25fjQSyoD
    C1UhRsR25fjQSyoD
    aFpGabIVmWdOOQOJ

    • Remove the four screws from the corners of the motherboard with the Phillips #1 screwdriver.

    • Lift the motherboard up and out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Enrique Howell

Membro da: 23/08/23

401 Reputazione

0 commenti