Introduzione

An awesome sandal lost its sparkly ornament. Its mate still sparkles and looks super-cute—save the sandals! You can find a replacement ornament or brooch at a hobby or craft shop, and using basic sewing skills, you can attach a replacement. Be careful if you're a novice—needles are sharp!

  1. s6lLyJfbLLZe46JA
    s6lLyJfbLLZe46JA
    2km16W5Kyra4dOnE
    yT1iPC1ZvOmHTN2C
    • Unwind about 10" of thread. Cut and thread through the needle. Tie a double knot at the end of the thread.

  2. vsCUNqKTBrRgje2N
    vsCUNqKTBrRgje2N
    byvnm5trOdJkDeUJ
    • The threads and empty holes show exactly where to attach the shoe ornament.

    • Cut off the old threads.

  3. TkXu2fwmrrQ5q6fX
    TkXu2fwmrrQ5q6fX
    VvyRWBnsnIjmQI54
    • Start the threaded needle on the upper side of the sandal.

    • The ornament will hide the knot.

    • If pushing the needle through the sandal strap is difficult, you might try turning the sandal at an angle and using your flat surface as a pressing point.

  4. YSuMItVAB6Cf1msF
    • Pull the thread through the ornament's opening.

    • Be careful—needles are sharp!

  5. DqSTgUpOULRrgF2p
    DqSTgUpOULRrgF2p
    fUDmdkrdhUfEMBEC
    bvJTsWHlQVaSDBdT
    • Pull the thread down and through the sandal straps.

    • Repeat the process, catching the ornament in a variety of places to anchor several sides.

  6. XjlTqxsr4Gw6MdnF
    XjlTqxsr4Gw6MdnF
    pXlEHZPedVv1pJsP
    • Pull the thread so that the ornament is tight against the sandal.

    • Remember to beware of that sharp needle!

  7. WUKYLPbPvdEL1sP6
    • Run the needle back through the sandal strap, then tie a knot at the base of the thread.

    • Double the knot before using your scissors to cut the thread.

    • Cut the thread just above the knot.

    • Be careful—scissors are sharp.

  8. I1MDYAefGeqLltKb
    • Completed sandal—ready to wear!

Conclusione

Enjoy wearing the sandals!

KaC

Membro da: 27/08/23

157 Reputazione

0 commenti