Shark Lift-Away Professional Steam Pocket Mop Accessory Hose Attachment Replacement

Scritto Da: Rachel Howe
  • Commenti: 2
Shark Lift-Away Professional Steam Pocket Mop Accessory Hose Attachment Replacement

Difficoltà

Easy

Passi

2

Tempo Necessario

1 minuto

Introduzione

If you need to replace or re-install the accessory hose attachment for your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed to complete this replacement.

  1. K2UQDasJYKSAqUnq
    K2UQDasJYKSAqUnq
    5FvXvsAj1GRjn4tV

    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

  2. k1fElnPEhupAhRx6
    k1fElnPEhupAhRx6
    LcSaEBsec42SGkyC

    • Disconnect the hand-held steamer unit from the accessory extension hose.

    • Grip the hand-held steamer and push down on the two release buttons.

    • Gently pull the accessory extension hose out in a horizontal motion until it disconnects.

    • When reassembling, be sure to insert the base of the hand-held unit first.

    • If you have any problems with the hand-held steamer locking into place, please consult our Troubleshooting Page.

    • While the accessory extension hose is not pictured here, the procedure is the same.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Rachel Howe

Membro da: 17/10/18

261 Reputazione

2 commenti

What if it won't allow to power on once reassembled? The light flashes but won't click on.

Aubrey Diaz -

really?? take it on and off with more words.... how about something helpful like where this stupid little rubber band goes so that the trigger is actuated when the unit is placed in the floor mopper. pat yourself on the back you rewrote the basic user instructions and called it a repair. thanks for the complete waste of my time

Jessica Mcallister -