SiriusXM Onyx Plus Buttons Replacement

Scritto Da: Angel Rivera
  • Commenti: 0
SiriusXM Onyx Plus Buttons Replacement

Difficoltà

Easy

Passi

7

Tempo Necessario

4 minuti

Introduzione

Buttons might tear and get worn out so it is important to replace the buttons.

  1. l1kZwrK6BWICIv5u

    • Wedge a plastic opening tool in between the case.

  2. FxuqXBPwGPsHKGCj
    FxuqXBPwGPsHKGCj
    HvMD1yLiDTOkE4LV
    bJVVLF3ZZoFLLRNi

    • Starting with the bottom left corner, press down on the plastic opening tool to unhook the latches on the inside of the device.

    • You have to start with the bottom left and right corners, and then flip the device to over and do the top of the device.

  3. RrNIEo2kWYJrOot2

    • Once unclipped, separate the back casing from the device.

  4. 441RdPIuj33N1Cik
    441RdPIuj33N1Cik
    HmCFyUlNo1AqmZHV

    • Remove the three 5mm JIS #00 screws from the motherboard.

  5. IBluLkfxeLosCA4Y

    • Unlatch the two clips that hold the motherboard in place.

  6. HNtcJuJvBYKIYeNn

    • Lift the motherboard up and out of the frame.

  7. oScejmCyWu2cXKID
    oScejmCyWu2cXKID
    4PtsufgvYVFZ3aUk

    • Holding the front casing in your hand, push the button panels out of the casing.

    • There are two buttons panels: Navigation panel and the Channel Number panel

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Angel Rivera

Membro da: 25/01/18

532 Reputazione

0 commenti