How to replace the connector of an Aeroflex ventilated suspension system.

Scritto Da: Daniel Schmid
  • Commenti: 0
How to replace the connector of an Aeroflex ventilated suspension system.

Difficoltà

Moderate

Passi

3

Tempo Necessario

5 minuti

Introduzione

A backpack often has to take a lot when you are on the road. Due to frequent use, the connector may break and need to be replaced. Here we show you how to replace a broken connector with a new one and how to get your backpack ready for use again!

  1. JhpIRnmJtTItcrv3
    JhpIRnmJtTItcrv3
    ES6BIf6bbSwWhCPL
    unZ2PyoL4HcDj6rb

    • Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first!

  2. HMXZ13aZNHHWIgSl

    • First press the frame into one side of the conector. Note: The wire frame must be on top of the conector.

    • Important: It must click!

  3. opZ3Utp1iHLikFTL
    opZ3Utp1iHLikFTL
    vKEHH5RNOnmfybhE
    3omAjHrpUE1jypUs

    • Then press the wire frame into the other side.

    • Important: It must click!

Conclusione

Finished! You did it.

Autore

Daniel Schmid

Membro da: 22/02/16

387 Reputazione

0 commenti