Sony DVP-NS325 Motherboard Replacement

Scritto Da: madison mathis
  • Commenti: 0
Sony DVP-NS325 Motherboard Replacement

Difficoltà

Moderate

Passi

6

Tempo Necessario

20 - 30 minuti

Introduzione

If you need to replace an old or damaged motherboard, access the motherboard with this guide. The motherboard is a vital piece for the Sony DVD player, It runs all systems making sure everything is running properly and smoothly.

  1. iNKnRhQwmm5U3xyU
    iNKnRhQwmm5U3xyU
    gYIUODX2rqitdq1e
    tVX2knh6Jr4JAbbh

    • Use a Phillips screwdriver to unscrew the five screws.

  2. qtucIPw1pJyMJP5q
    qtucIPw1pJyMJP5q
    Ia5V4PwuNjqtKAga
    Zvl3RBLDUFsAt5tP

    • Use the Philips screwdriver to remove the screws located on the sides and the back.

    • Not shown are the right side screw and the middle screw.

  3. TMDEQ3Iyru1fWT1v

    • Use a spudger to separate the case from the chassis.

    • Remove the case.

  4. MAEHWfrLw4Z2WS1l
    MAEHWfrLw4Z2WS1l
    ZeXnPG5IfUrUrkMs
    31RGydeyPrPXQkim

    • Remove all cables that are connected to the motherboard by pulling upwards from the motherboard.

    • Grip as close to the connectors as possible. Avoid pulling on the wires/ribbon cables.

  5. 3kHHKifNTmFY5Gjb

    • Use a Phillips screwdriver to remove all screws located in the 4 corners of the motherboard.

  6. IPiLOCMTdcQdYeRp

    • Pull the motherboard up and out of the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

madison mathis

Membro da: 15/09/23

357 Reputazione

0 commenti