Introduzione

Guida solo prerequisita per rimuovere il supporto del disco rigido prima della scheda madre.

  1. jWXmBog4lKr4HqkV
    • Svita la vite Torx T8 da 7,3 mm che fissa il supporto dell'unità alla scocca posteriore.

    it`s a t10 screw..! ;)

    happymac venezuela -

    I found it easier to connect SATA cable before fixing tray.

    Mārtiņš Jansons -

  2. qUxSodfw5NxJMghA
    • Rimuovi il supporto del disco rigido.

    I am following these procedures for the following: iMac Retina 4K - 21.5" - 3GHz Quad Core - Radeon Pro 555 2GB - 4GB/4GB (8GB total - 2 slots) 2400MHz DDR4 SO-DIMM - Mid 2017 - Model: MNDY2LL/A - iMac18,2 - A1418 - 3069. In my case, the SATA cable is clipped into the bottom of the hard drive tray. Pull the hard drive tray up slightly and angle to reveal clips. SATA cable pops out from the side of each clip.

    iannai29 -

    Better yet, after reading Step 49 - no need to remove SATA cable from the bottom of the hard drive tray.

    iannai29 -

Conclusione

Per riassemblare il dispositivo segui questa guida al contrario.

Evan Noronha

Membro da: 06/02/15

223184 Reputazione

0 commenti