Introduzione
Quando si rompe un tirazip, o semplicemente il cursore non scorre più, non è necessario sostituire l'intera cerniera. Basta sostituire il cursore. Si tratta di una riparazione veloce che può fare la differenza tra una zip che non funziona più e una che funziona come se fosse nuova. Verificate la misura del cursore da sostituire guardando la parte inferiore del cursore originale.
Per cercare parti di ricambio oppure ottenere ulteriore assistenza, contatta:Patagonia Customer Service.
Strumenti
Ricambi
-
-
Individuare il fermo superiore della zip sul lato in cui va montato il cursore.
-
Utilizzare le pinze per terminali per rimuovere il fermo superiore dalla zip.
-
-
-
Utilizzare le pinzette per rimuovere i pezzetti rimanenti del fermo dal capo di abbigliamento.
-
-
-
Prendere un nuovo fermo superiore.
-
Posizionarlo sulla fettuccia della zip nello stesso punto in cui era fissato il fermo superiore originale.
-
Per cercare parti di ricambio oppure ottenere ulteriore assistenza contatta:
22 commenti
Where do I get the parts needed?
Off of another zipper
Amazon has replacement parts, but I found you can get almost any zipper parts from a sailing supply company called sailrite.com.
Perfect...thank you! I had seen about 10 other videos on how to do this repair but yours was the one that showed me exactly how to do it and it worked perfectly the first time. Much appreciated!
Thank you! This was great - I ordered the knippers and replacement parts for a jacket of mine that I broke, as I know my children will be breaking there's sooner or later. It cost me $10 instead of $40+ to replace a jacket.
Where did you get the replacement end plastic endstop?