Sostituzione batteria Logitech Circle

Scritto Da: Kylie
  • Commenti: 27
Sostituzione batteria Logitech Circle

Difficoltà

Facile

Passi

8

Tempo Necessario

15 minuti

Introduzione

Questa guida ti consentirà di rimuovere e sostituire la batteria all'interno del Logitech Circle. Questa guida è abbastanza semplice da seguire, con solo poche viti tra te e la batteria stessa. Tuttavia, assicurati di maneggiare con cura Logitech, poiché il pacchetto batteria e obiettivo è collegato alla base del cerchio con un nastro che si rompe relativamente facilmente.

  1. G131Jovy3ks3uW1W
    G131Jovy3ks3uW1W
    Hwl5iYnXQMf3jSuF

    • Incunea lo strumento di apertura in plastica sotto la lente del cerchio nero per fare leva delicatamente

    • L'obiettivo è fissato solo con nastro adesivo e dovrebbe essere rimosso con relativa facilità.

    Just like you said, Very Easy.

    Now, where can we buy the battery.

    Thank you for your help.

    G.R.

    Guy Romagnoli -

    Anyone?!?! The battery please!

    Mike Arango -

  2. opsOuOQGPw6Fyut4

    • Rimuovi le quattro viti a croce Phillips #0 da 3 mm che fissano il primo anello

  3. vWUEeMooDuyEIFHt
    vWUEeMooDuyEIFHt
    XnjYIiUmxUwU3x5N

    • Rimuovi le quattro viti a croce Phillips #0 da 3 mm che fissano il secondo anello.

  4. PPxntRu6SOPsfaDw
    PPxntRu6SOPsfaDw
    1ksirTMyVXZPV5CL

    • Rimuovi le quattro viti a croce Phillips #0 da 3 mm che fissano l'anello finale. Non rimuovere ancora il gruppo obiettivo/batteria.

    • Il gruppo obiettivo/batteria è fissato alla base tramite un cavo a nastro che può rompersi, quindi fai molta attenzione a maneggiare il cerchio.

  5. HMqGgmMgewiTJtsh
    HMqGgmMgewiTJtsh
    G4rkrw2ZsNJLL4sd

    • Rimuovi delicatamente il gruppo lente/batteria dalla base del cerchio, facendo attenzione al cavo a nastro.

  6. Eh2JNbHcQlFnWVXx
    Eh2JNbHcQlFnWVXx
    KmSBFyhATPfVnU4R

    • Tira delicatamente il cavo a nastro dal gruppo obiettivo/batteria.

    • Anche se questo non è un passaggio del tutto necessario, aiuta a garantire che il cavo a nastro non si rompa durante il resto della sostituzione della batteria.

    I can't find the same battery, what can I get with the same characteristics? Thank you

    lellab72 -

    Salve dov’è posso trovare il cavo a nastro che si è rotto grazi

    Vincenzo Cristofaro -

  7. RbNHmH566h1WQSvy

    • Scollega con attenzione la batteria dal resto dell'obiettivo.

  8. mFDBGWuGwQxFQ2ur

    • Rimuovi la batteria utilizzando uno strumento di apertura in plastica. La batteria è fissata con del nastro adesivo e si rimuove con delicati movimenti di leva.

    From to get an extra battery for Logitech security camera

    Mahnoor Khan -

    Battery info please 🙏🏼

    Mike Arango -

    Go on eBay and search ‘603040 battery’.

    benbiggey -

    Quale batteria comprare per sostituire quella della telecamera?

    lellab72 -

Conclusione

Per riassemblare il tuo dispositivo, segui queste istruzioni in ordine inverso.

Autore

Kylie

Membro da: 28/09/17

345 Reputazione

19 commenti

What about circle wireless batter with the unscrewBle lens? I keep getting error in set up that the battery is too low to proceed.

I charged only the battery portion all day. Stil. Same results

Diane Fischer -

Did you figure out the battery?

Mike Arango -

Where did you buy the battery? I can’t find something to replace it with :(

Razvan Ciocanel -

I measured my battery and it is 40mm x 14mm x 30mm. The space for the battery looks like I can fit something as long as 45mm. I can not find anything in the US. Going to try these: https://www.ebay.com/itm/3-7V-1200mAh-10.... Pretty annoying that I can not find something to drop in. The most challenging part of this repair is going to be wiring these two Lipos together properly. Does anyone know the voltage of the 3 wires? My battery is completely dead so I cannot get a voltage reading. I am going to have to plug the camera in, plug the battery connector in and get the voltage from there :)

Jonathan Flower -

Hey, did you manage to make this work? I want to order some battery and try the same thing. I understand that you need 2 from the pictures. How are they tied together? You can not see that from this tutorial.

Razvan Ciocanel -

What kind of battery do I need to buy? Is it aaa?

karen c. -

Just like you said, Very Easy.

Now, where can we buy the battery.

Thank you for your help.

G.R. 200.12.26

Guy Romagnoli -

Thank you very much, very good information and like you said, very easy.

Great job.

G.R

Guy Romagnoli -

Did anyone find out what battery it is that is needed for replacement?

Chris Wilson -

Help!! Battery

Mike Arango -

Kindly does anyone know the link where to buy the batteries?  Thank you

fabianobu -

Where to find the battery, that is a very good question. I’m glad that I removed mine from my camera as it had started leaking inside but was not anywhere on the boards. I put it together without the battery and works fine.

rcodea -

So it worked without the battery?

Mike Arango -

Hi all, I found the battery replacement and followed the guide... Wonderfull, no more battery alarm. Thank you

https://it.aliexpress.com/item/330479248...

Vincenzo Mileto -

Still looking for a battery- anyone??

Mike Arango -

I can't find the same battery, what can I get with the same characteristics? Thank you

lellab72 -

Battery reference: 533-000125

available on aliexpress

Grégory SALVIGNOL -

Great tutorial! Thanks!

My camera is always on its charging ring, but when the battery expired the camera would not function...

So, I've now removed the battery entirely, and the camera lives again!

Neil Taylor -

First of all a BIG thank you to IFIXIT for this guide.

The battery completely failed on my camera.

It went ‘offline’ and then would not work or be re-added using the app. It was dead and I could not get it to show a blue LED or bleep as it should when ‘resetting’ it.

Having read one of the comments above, I took my camera to pieces step by step as in the guide. If you do this,  follow the guide carefully, particularly with regard to the fragile ribbon cable between the camera base and the electronics that you are taking out. When you reassemble the camera, make sure the ribbon cable is fully plugged into its socket.

The only thing I did not do is replace the battery. I left the camera without a battery.

Mine is always on the charging ring, so that does not matter. I never used it with just the battery.

Having taken the battery out and re-assembled the camera, it COULD then be ‘added’ again - it DID show a blue LED and it is now fully working but without a battery.

I hope that helps someone else.

Wayne S -