Introduzione
Come rimuovere la scheda SIM dall'iPhone di prima generazione.
Strumenti
Ricambi
-
-
Inserisci uno strumento di espulsione della scheda SIM o una graffetta nel foro accanto al jack delle cuffie.
-
Premi sull'attrezzo finché il vassoio della scheda SIM non fuoriesce.
-
Conclusione
Per riassemblare il tuo dispositivo, segui queste istruzioni in ordine inverso.
6 commenti
Try with a little strap cut out from a radiology exam sheet. Put it inside the sim tray and try to open again. It works.
Does anyone know where I can get a SIM tray and card for the 1st get iPhone model A1203?
TIA
To remove the SIM, insert the end of a SIM eject tool or a small thin paper clip into the hole on the SIM tray. Press firmly and push the tool straight in until the tray pops out.
http://support.apple.com/kb/ht1438
neuronetix -
I put the SIM card back in, and the slide to unlock does not work.
dean -
The only carrier to accept this iPhone was AT&T, they have discontinued use of that baseband. Nobody else in the world except for early renegade reverse engineers such as Geohot can get the device to work as a really old iPod no use unlocking the device because the technology inside the most recently OEM sold/refurbed iPhone 1st gen fails universally. You should only buy a screen assembly and snap it onto the back and call it a dummy phone and put it in a museum.
Alexander Weinhart -