Sostituzione dello schermo LCD Sony α6000

Scritto Da: Rohn Albertson
  • Commenti: 6
Sostituzione dello schermo LCD Sony α6000

Difficoltà

Moderato

Passi

8

Tempo Necessario

20 - 40 minuti

Introduzione

LCD sta per "liquid crystal display" (schermo a cristalli liquidi), ed è utilizzato per i display in diversi dispositivi. Gli schermi LCD sono più sottili rispetto alle tecnologie più datate, offrendo una migliore qualità delle immagini. Questa guida ti mostrerà con successo come sostituire lo schermo LCD della tua fotocamera Sony a6000.

  1. MnHpGenuLZHflFxB

    • Rimuovi le due viti Phillips #00 da 1,75 mm posizionate sul margine inferiore dello schermo LCD.

  2. aYbPKrFcUCqHlOWM

    • Rimuovi le due viti Phillips #00 da 1,75 mm posizionate sul lato posteriore dello schermo LCD.

    This step is impossible, the LCD screen is stuck at an angle where it's impossible to get the Phillips onto it without stripping the screw. Horribly inaccurate picture of how 'easy' it is to put the screwdriver there.

    Rawr Peng -

    Same as what I am thinking.

    cloud.liu989 -

    I'm sorry you had problems with this guide. Just curious if you or cloud.liu989 found another way to access the LCD screen? Did you have to complete a prerequisite guide first or do you have any suggestions or tips? If you have any, we would love the help and will make a note in the guide. Thanks!

    Sarah Westberg -

    Having just performed a screen change and also found this step confusing I find it relevant to add a bit of information regarding this step. The two screws at the back of the screen are very difficult to reach, as they are about 30mm away from the camera body. Going at it with a screwdriver at an angle is NOT the solution as it will strip the screws. There is just enough place to slide a screwdriver bit in between the screen and the camera body, I was able to get enough torque simply by holding the bit with my fingers. Using pliers to hold and rotate the bit also makes it easier if you are having a hard time getting enough grip.

    Pierre Masselot -

  3. S2GgXCeeDlOVfZga

    • Separa attentamente il margine inferiore della cornice dalla superficie posteriore dello schermo LCD.

  4. gdPTlTbL1RrKVwlm

    • Rimuovi la protezione argentato dal lato posteriore dello schermo LCD.

  5. dCbgwShq4e6ZTC6R

    • Rimuovi il supporto più piccolo che copre la parte inferiore della scheda di controllo.

  6. UTMiVgYHmlBwAaPy

    • Rimuovi con attenzione lo spessore posto dietro lo schermo LCD.

  7. kuOpjXpFMJAGcDFV

    • Stacca il nastro dal connettore con una pinzetta.

  8. NgBX3VAQXfcCmhmD

    • Tira lo schermo LCD lontano dalla fotocamera e mettilo da parte.

Conclusione

Per rimontare il tuo dispositivo, segui queste istruzioni in ordine inverso.

Autore

Rohn Albertson

Membro da: 14/07/19

635 Reputazione

2 commenti

Step 2 makes this repair impossible, the LCD screen is stuck at an angle where it's impossible to get a normal Phillips onto it without stripping the screw. Horribly inaccurate picture of how 'easy' it is to put the screwdriver there. Don't follow this guide.

Rawr Peng -

Saw a bran new a6000 screen on eBay. So, I thought it would be easy to replace the scratched screen from my a6000. WOW was I wrong!

First I would say that step 2 is very hard to accomplish without stripping the screw. You need to pry the screen to get to an angle where it's doable. On my first attempt I striped the screw. I tried it on a second a6000 and successfully could remove the screw.

As it wasn't evident to me at first, I think it's important to specify that on step 7 you need to lift carefully the little black flap on the zero insertion force cable connector to unlock it. It's weak and I feel like it would be very prone to breaking.

What is NOT showed on this guide is what comes AFTER step 8! The screen is actually in a plastic frame That does not ship with the replacement screen and this frame is glued! So unless you have plastic glue and are able to unglue it first, you should NOT attempt this repair.

Consequently, I reassembled everything and have resigned myself to living with the scratchs.

Drgonz0 -