Introduzione
Questa è una guida scritta per aiutarti nella rimozione e sostituzione della griglia esterna della Logitech UE MegaBoom.
Strumenti
-
-
Trova le estremità della cassa.
-
Infila uno strumento di apertura in plastica tra l'estremità in gomma e la maglia.
-
Fai leva verso l'alto per aprire l'estremità.
-
Ripeti questa procedura anche per l'altra estremità.
-
-
-
Prendi il Jimmy e fai leva sulla striscia in gomma con i tasti del volume.
-
Rimuovi la parte in gomma che hai separato.
-
-
-
Usa delle pinzette per sollevare l'estremità del blocco in plastica sul bordo della maglia dal suo canale.
-
Sfila il blocco in plastica del canale dal suo alloggio attorno alla cassa.
-
Ripeti per l'altra estremità.
-
Per rimontare il tuo dispositivo, segui le istruzioni in ordine inverso.
2 commenti
You know where to buy a replacement mesh in custom colors
Bonjour merci pour le tuto mais ou trouve t-on le “outer mesh” de remplacemet????
Merci d’avance
Evan
Pry all the way around with the tool as there are “clips” that hold the cap in place all around beneath the cap. Avoid trying to “pull the lid open” from the opening of a half opened lid.
Jamin Hu -
Stop! Before you proceed, notice the comments at the end of the guide. You don't have to take apart both sides or remove the mesh fabric. Remove just the bottom cap (with the aux/charge plug).
Then carefully remove the glue securing the circuit board on the sides and gently pull the board out to reveal the battery under it.
Caleb Kelsay -
FWIW I had no luck opening these caps with the tools I bought on iFixit (plastic pry bar, metal Jimmy). I had a lot more luck using the flat edge of a butter knife! (it still took lots of work on my UE Megaboom 3)
Travis Taylor -