Sostituzione schermo Samsung Galaxy Tab S2

Scritto Da: Jovina Martinez
  • Commenti: 25
Sostituzione schermo Samsung Galaxy Tab S2

Difficoltà

Moderato

Passi

4

Tempo Necessario

15 minuti

Introduzione

Il tuo schermo è crepato o non mostra più alcuna immagine? Sostituirlo potrebbe risolvere il tuo problema.

  1. G5Jo2NlpVoHkSiRd

    • Lavorare sul dispositivo mentre è accesso potrebbe farti prendere la scossa. Assicurati di spegnerlo e scollegarlo dal caricatore prima di iniziare.

    • La rimozione dello schermo può risultare difficile a causa dell'adesivo resistente usato.

    • Scalda tutti i 4 bordi del dispositivo appoggiandoci un iOpener o usando una pistola termica per ammorbidire l'adesivo lungo i bordi dello schermo.

    m.E. wichtig vorher die Kartenhalter für SIM und SD entfernen, sonst löst sich der Kontakt unkontrolliert bei Schritt 6.

    Frank Huebner -

    You make no mention of re-Glueing the screen, just applying the steps in reverse order - does that mean simply applying heat again will re-glue the components from the residue?

    Robin Penny -

    i replaced the battery, the sticky tape did hold up again, but if you replace the screen it depends on whate side the tape sticks to. On ine the most part of the tape stuck to the screen.

    Steffen Hahn -

    I know its 2020 but i cracked my screen and idk if its on or not

    benjamin burkowski_FaZe -

  2. BLZ2ilURXWWMtnqH
    BLZ2ilURXWWMtnqH
    yAmeeyVFkboaMmbN

    • Infila uno strumento di apertura in plastica nella fessura sul bordo del dispositivo vicino ad un angolo, dal quale inizierai a rimuovere lo schermo.

    • Applica una piccola ventosa vicino all'angolo dove hai infilato lo strumento di apertura.

    • Tira verso l'alto la ventosa mentre spingi verso il basso lo strumento di apertura per rimuovere lo schermo (potrebbe servirti una mano per tenere fermo il dispositivo mentre fai leva).

    • Un cavo a nastro è collegato al retro dello schermo. Evita di sollevare o muovere lo schermo più di 8-10 centimetri prima di scollegare il cavo, altrimenti potresti danneggiare il cavo stesso o il dispositivo.

    The lower portion of the screen is glued to the body. The screen is unable to be completely removed.

    Chad Naville-Cook -

    That blue plastic tool doesn’t work

    Jarred -

    starte oben, unten verhindert eine Nase an dem Audioanschluß das erste anheben.

    start upside, downside a nose at the audio connector prevents the first lifting.

    Frank Huebner -

    Difficile, j'ai acheté les outils nécessaires. Après avoir chauffé les côtés et essayé de les décoller, la vitre a craqué.😠

    Pierre Simard -

    Had to use a heat gun to remove with patience and time, using a pic to "saw" into the seal, starting with the right side corners. Stopping every few seconds to reheat with heat gun. Take care on the bottom left corner, and left side. There is very little room between the edge and LCD, making it easy to stick a plastic pick or removal tool in between the LCD and front glass. The other sides have more room for prying. I nicked the bottom left corner with a prying pic, which killed the entire display :-( Good luck!

    Dustin Eyestone -

  3. MopncCRVsusSWaEW

    • Un pezzo di nastro argentato è incollato sopra il cavo a nastro dorato che collega lo schermo al tablet.

    • Usa un paio di pinzette per rimuovere attentamente il nastro argentato.

    Hi. My SM T 815 (Tab 2) flickers and switches off. The screen is still fine. Well atleast it looks fine. But it doesn’t switch on. Could it be the reflex cable? Why is it doing this? And how can it be solved?

    Thabo -

  4. FZRqiZVICTA1HWwV
    FZRqiZVICTA1HWwV
    cALdJRorR3I33xdI

    • Usa lo strumento di apertura in plastica per sollevare delicatamente e scollegare il contatto del cavo a nastro dorato dello schermo dalla sua presa nel tablet.

Conclusione

Per rimontare il dispositivo, segui le istruzioni in ordine inverso.

Autore

Jovina Martinez

Membro da: 20/01/16

2084 Reputazione

15 commenti

How about removing just the screen from the digitizer

nevillenicol -

I agree, is removing the glass from the digitizer similar to samsung phones like the s4 and s5?

bhayden75 -

Where do you get a new screen if the one you have is cracked

aleclittlelebronjameson -

You can get a screen from Ebay or do a Google search. But the cost is half the cost of the tablet. So its around $200+

jamarjynr -

Actually I found that your could buy a non damaged tablet working fully for $150 USD and it was/is $259 for the complete screen assembly. So basically it's $100 cheaper if you just buy another tablet than it is to buy a replacement screen for the SM-T810. Ridiculous I know. I let the seller of the screen know about his silly price (in a nice way) but he would not budge. I also could not find any other listing on ebay or Amazon for that model he was the only seller with that part. It's better to just curse the tablet and move on and buy a newer tablet which would likely cost less and do more than the tab 2

machv5 -

individual parts usually more expensive for whatever reason (the sellers won’t come down as they are that expensive-so repairs take a backseat and folks go out and buy new devices…unless of course you can fix it yourself successully)

s ner -

Is there a way to replace only the glass for 50 dollars instead of replacing the whole lcd for 200?

tamasszebeni -

There were a few more sources that were selling just the touch screen glass but I did not check 2 see if the tab 2's touch screen & digitizer are fused together with UV glue. Which if it is would make the repair far more tricky to complete successfully. Requiring a heat gun good manual dexterity various pry tools & a digital thermometer to get a surface reading so you don't cook the lcd during the repair, but get it hot enough so the glue turns back into a liquid. Or you can buy a machine that makes separating the screen easier but only performs that one task of screen separation. Not worth the expense unless you plan on making a living in screen repair. And you'll need solvents to remove all the old glue, new UV glue and a black light to set the glue once you pair the new touch screen to the old LCD. Another tricky routine that needs to be done properly & has a small amount of forgiveness for sloppy work.. Much better to beat the tab 2 with a hammer and work out some frustrations and buy a new tablet by far.

machv5 -

My son dropped his and it landed flat face down...screen shattered...can't find a screen to buy anywhere in australia and the two places who claim they can repair it want a $100 less than a new one.....last time i buy a samsung product....it's a disgrace they don't look after their customers...

john higgins -

Really? Try dropping an iPad and see if you can get it repaired cheaper.

jaspchew -

the screen and the digitizer are bonded by 4-5 strips of tape

m m -

the 4-5 strips of tape are between the digitizer AND the screen frame with the main body/carrier. It appears that there are 1-2 adhesive sheets/stickers between the digitizer and the screen itself.

http://www.ebay.com/itm/Genuine-Samsung-...

http://www.ebay.com/itm/Genuine-Samsung-...

s ner -

Any idea on how the screen assembly is glued to the frame of the tablet? After a LCD change by a service center now my whole screen falls out of the frame.

Gabor -

@jovinamar

i have a samsung s2 SM-T818W(WiFi + Cellular ). Do you think that wifi and wifi + celluar models have same lcd or different?

Altamesh Maknojia -

do you need to replace the double stick tape around the screen. if so what mm with (1, 2 or 5?) I need to replace my USB port and have to access screws behind the screen to remove the circuit board.

Joe Dunbar -