Introduzione

La tua cassa JBL Flip 4 fa degli stani rumori? lo speaker suona diversamente da come era appena presa? Se è così, il tuo speaker anteriore della JBL Flip 4 potrebbe essere danneggiato. Questa guida ti mostrerà come rimuovere lo speaker danneggiato in modo da poterlo sostituire con uno nuovo.

  1. hXpESn4SLMTqyCJT
    hXpESn4SLMTqyCJT
    Kr1XYvYeyV2XusvB
    oggMjxb6wOaJ4qlD
    • Infila uno strumento di apertura in plastica nella fessura tra la maglia e la copertura in gomma con il tasto di accensione.

    • Fai leva sulla maglia per rimuoverla, iniziando dal lato senza i tasti del volume e del bluetooth.

    • Mentre rimuovi la maglia, farà dei suoni di scatti.

    • Tira via la maglia con i pollici.

  2. JyJny1cFx1nK6LIY
    • Svita le quattro viti a croce JIS #1 da 10 mm attorno allo speaker anteriore danneggiato.

    • Gli speaker contengono dei forti magneti. Tieni alla larga gli strumenti in metallo o altri oggetti magnetici da questi magneti.

  3. 3QKw2PcOMxQX1KbV
    3QKw2PcOMxQX1KbV
    LFvXNFfygMiMkYCE
    WbpsMOTgIZRQ5aaL
    • Infila lo strumento di apertura in plastica sotto lo speaker anteriore che hai svitato.

    • Rimuovi lo speaker anteriore facendo leva con lo strumento di apertura.

    • Non forzare lo speaker anteriore: è collegato con dei cavi all'interno del dispositivo.

  4. xsUyPMZrsaNPOvUH
    • Taglia i cavi rosso, bianco e nero collegati allo speaker usando dei tagliafili.

    • Dovrai risaldare questi cavi quando installi un nuovo speaker.

    where can i find replacement speaker

    Soan Soram -

    Die Kabel müssen abgelötet werden!

    Sie haben auf der Platine auch eine Steckverbindung.

    Und was nützt die beste Anleitung, wenn man die Lautsprecher nicht bekommt.

    DER - JAK -

    Ersatzlautsprecher habe ich bei Ebay gesehen.

    Oliver Bauer -

Conclusione

Per rimontare il tuo dispositivo, segui le istruzioni in ordine inverso.

Ryan Whitlock

Membro da: 08/10/18

2050 Reputazione

16 commenti

And where can you find the replacement part? I cannot find a replacement speaker on the internet…

Sven Meirsman -

Exactly, what is the part number for the internal speaker?

Dan The Menace Brenes -

The part number is: psp00018001

Johankat -

If the magnet comes loose from the speaker how do you get it back on?

Andrew Sumahit -

Replace the entire speaker.

Magnet realignment is crucial for the speaker to perform properly.

Johankat -

Why does this transducer have 3 terminals?

aswinjayan007 -

From what I can read it's for shielding, to reduce interference. But I also read that it would not be very effective.

Looking at the transducer, the white wire is merely connected to the chassis.

It can be omitted, so no need to find a replacement that has a shield lead.

Johankat -

Where I can find the replacement speaker

quesitosmr -

I couldn’t find replacement drivers for the flip 4 so I just duck taped the driver pads, they work ok now.

maxwell mayhew -

It really work??

Le Charo du 35 -

For replacement speakers Google is your friend.

You can find fully disassembled kits for 10-20usd.

Speaker Id: psp00018001

Johankat -

Hello, I live in Brazil, if I open the plastic/cloth part to see if my speakers are damaged will I void my warranty?

Owskee -

I have a Flip 4 where I just replaced the motherboard. However the wires that are attached leading up to splice with the speaker are aluminum. My speakers off the original Motherboard has copper wire. After splicing the 2 together, i checked for continuity and it was successful but i did not have any sound from the speaker. Please Help

Marcus King -

Der Austausch ist nicht das Problem. Aber wo bekomme ich ein Ersatzteil her. Mit der Nummer psp00018001 finde ich im Netz nichts.

michael.bunte -

Ich habe erst vor kurzem Ersatzlautsprecher auf Ebay gesehen.

Oliver Bauer -

Where to find these speakers? Have googled but could not find any that ships to the Netherlands!

Ronald Blaas -