Sostituzione telaio intermedio Samsung Galaxy S4

Scritto Da: Sam Goldheart
  • Commenti: 25
Sostituzione telaio intermedio Samsung Galaxy S4

Difficoltà

Facile

Passi

11

Tempo Necessario

5 - 10 minuti

Introduzione

Usa questa guida per sostituire il telaio centrale del tuo Samsung Galaxy S4.

  1. rjhlmKL4roqDcNeD
    rjhlmKL4roqDcNeD
    ySIEOikDPMFCTh6j

    • Fai leva, con uno strumento di apertura in plastica o con un'unghia, nella fessura a sinistra della fotocamera posteriore, vicino al pulsante di accensione.

  2. QoGD1nhUjIK4SYhA
    QoGD1nhUjIK4SYhA
    mYdKICGURgG1VuPm
    EGyVAufYjRnV5oMH

    • Solleva il case posteriore dall'angolo più vicino alla fessura e rimuovilo dal telefono.

    Where is the divot? Please let me know that

    James -

    I purchased a blue plastic opening tool(AKA: Spudge) like the one used in the above Step 1 rear cover pic and found the divot and was able to take off the rear cover as per the “Step 2 “ instructions.

    Terry Crawford, Jr. -

  3. MDC6e1YyIBLkTSJq
    MDC6e1YyIBLkTSJq
    r4qIuNXi4DRJBNYO
    alOZWSSKuQtAOYyx

    • Usa l'estremità piatta di uno spudger o un'unghia per spingere la scheda microSD lievemente più in profondità nel suo alloggiamento, finché non senti un clic.

    • Dopo il clic, lascia andare la scheda, che a questo punto uscirà dal suo alloggiamento.

    • Rimuovi la scheda MicroSD.

    • Per la reinstallazione, spingi la scheda MicroSD nel suo alloggiamento finché non si sente il clic che conferma il bloccaggio in posizione.

    I was able to remove the MicroSD Card as per the Step 3 MicroSD instructions with no problems.

    Terry Crawford, Jr. -

  4. crygJXPQtUYDKNlg
    crygJXPQtUYDKNlg
    qFUmmdiFJSbJncKZ
    24gAbT1EpiKW1ldS

    • Inserisci uno strumento di apertura in plastica o un'unghia nella rientranza del vano della batteria e solleva la batteria stessa.

    • Rimuovi la batteria dal telefono.

    it worked for me

    John Donovan -

  5. MQ1HoKUOlTYUB2Fl
    MQ1HoKUOlTYUB2Fl
    sHEGGRwOQFo3IeR5
    FldhpEixJL5ycMhU

    • Usa l'estremità piatta di uno spudger o un'unghia per spingere la scheda SIM lievemente più in profondità nel suo alloggiamento, finché non senti un clic.

    • Dopo il clic, lascia andare la scheda, che a questo punto uscirà dal suo alloggiamento.

    • Rimuovi la scheda SIM.

    • Per la reinstallazione, spingi la scheda SIM nel suo alloggiamento finché non si sente il clic che conferma il bloccaggio in posizione.

    Looks easy but doesn't work. No one has a plastic opening tool. Using fingernail, you can press SIM card into slot but it does not pop out so you can remove it.

    Laurie McWherter -

    I agree with the comment above

    I also don't have a plastic tool and my finger nail won't pop the card out.

    Grethe Montano. September 22

    Grethe Montano -

  6. EDtlEYuMDEYXrblv

    • Rimuovi le nove viti Phillips #00 da 4,0 mm che fissano il telaio intermedio al gruppo display.

    How much it will cost to replace a midframe

    kannan -

    How much cost will be on replace a midframe

    Hiren pedhadiya -

    I'm seeing midframes available on Ebay for around $10.

    Alex -

    I purchased a 1.5x40mm Phillips screw driver and was able to remove all 9 40mm screws from the midframe as per the Step 6 Midframe instructions.

    Terry Crawford, Jr. -

  7. WSuKHwiYL4wEeKPM
    WSuKHwiYL4wEeKPM
    A3gOcQAfyqxkjAeK

    • Il telaio intermedio è fissato al gruppo display con diverse clip in plastica posizionate dietro la cornice cromata del telaio centrale. I prossimi (pochi) passi ti guideranno nella separazione delle clip per poter staccare il telaio centrale.

    • Iniziando dal lato del telefono con i pulsanti del volume, inserisci il tuo strumento di apertura in plastica tra la cornice cromata attorno al vetro del display e il bordo laterale cromato più grande. Cerca la fessura tra le due parti.

    • Fai scorrere lo strumento di apertura lungo la giunzione, separando le clip in plastica mentre procedi.

    • Usa molta delicatezza mentre fai leva e spingi solo quanto basta per separare le clip in plastica: ci sono diversi punti sottili nella cornice del telaio intermedio che possono rompersi se ti pieghi eccessivamente.

    I used same tool as in the photo and i broke the display. I think you should use a very thin plastic tool, such as a credit card but even more thin and flexible.

    nicosoranno4gxo -

    I purchased a blue plastic opening tool(AKA: Spudger) and was able to remove the midframe from the display assembly as per the Step 7. I had to hold the cell phone firmly in my left hand while I gently forced the spudger between the chrome bezel and the midframe with my right hand and heard plastics clips separate and saw the midframe start to separate from the display assembly. Don’t be afraid to get that spudger in and just gently go down the side of the phone and you will hear the plastics clips detach and the midframe to separate more and more until you are able to separate them 100%. I started at the volume button side of the phone in Step 7 and ended at the power button side in Step 9.

    Terry Crawford, Jr. -

    This blue Case Opening tool has a less rigid edge that is kinder to trim than the hard black Spudger shown in later steps. I was glad to have the right tool on hand at this step. Use it as a wedge and slide it along the gap.

    Tom Huber -

  8. mlLqgVTFjlULZmXr
    mlLqgVTFjlULZmXr
    xbBRETlSI6ZKDpZJ

    • Continua a far leva lungo l'angolo del telefono.

    • Fai scorrere il tuo strumento di apertura lungo la giunzione tra il telaio centrale e il display nella parte inferiore del dispositivo, staccando altre clip in plastica.

    I purchased a blue plastic opening tool(AKA: Spudger) and was able to remove the midframe from the display assembly as per the Step 7. I had to hold the cell phone firmly in my left hand while I gently forced the spudger between the chrome bezel and the midframe with my right hand and heard plastics clips separate and saw the midframe start to separate from the display assembly. Don’t be afraid to get that spudger in and just gently go down the side of the phone and you will hear the plastics clips detach and the midframe to separate more and more until you are able to separate them 100%. I started at the volume button side of the phone in Step 7 and ended at the power button side in Step 9.

    Terry Crawford, Jr. -

  9. NjGCILVpYvQZSYBN
    NjGCILVpYvQZSYBN
    KTbBqoxDr3GYJkMc

    • Ancora una volta, fai leva lungo l'angolo, fino al lato del pulsante di accensione.

    • Fai scorrere lo strumento di apertura lungo la fessura.

  10. YxMui1KI6EfoKuUH
    YxMui1KI6EfoKuUH
    KjQOOeflFdfxLybe

    • Continua a far scorrere lo strumento di apertura attorno alla parte superiore del telefono, staccando le ultime clip e liberando il telaio intermedio dal gruppo display.

    • A questo punto, puoi far passare di nuovo il tuo strumento di apertura in plastica lungo l'intero perimetro del dispositivo per essere certo di aver staccato tutte le clip di plastica.

    On my phone, there was another clip holding the white midframe to the battery compartment, in the middle of the top edge of the battery compartment, near the battery contacts. If you don't release that before removing the midframe, it is easy to break.

    josephoswald -

    I purchased a blue plastic opening tool(AKA: Spudger) and was able to remove the midframe from the display assembly as per the Step 7. I had to hold the cell phone firmly in my left hand while I gently forced the spudger between the chrome bezel and the midframe with my right hand and heard plastics clips separate and saw the midframe start to separate from the display assembly. Don’t be afraid to get that spudger in and just gently go down the side of the phone and you will hear the plastics clips detach and the midframe to separate more and more until you are able to separate them 100%. I started at the volume button side of the phone in Step 7 and ended at the power button side in Step 9. In Step 10 just make sure all the plastic clips are separated from the midframe and the display assembly so you can pull them apart 100% without breaking them.

    Terry Crawford, Jr. -

  11. MDb1XKUptBuYX6Bu
    MDb1XKUptBuYX6Bu
    R6HtRH5JnJXupZRr
    rDyAIYBh3bl6IN2Z

    • Rimuovi il telaio intermedio dal gruppo display.

    here i leave them a video i made doing the work

    https://www.youtube.com/watch?v=85pOvI6O...

    enjoy

    Gabriel Barrandeguy -

    My Sprint S4 was slightly different then the one pictured above but I just completed this repair in under 10 minutes.. It would have been slightly quicker but fooling around with those little screws can be irritating if you have big hands.

    Michael Willis -

    Just did this on my S4. Instructions were extremely helpful, but I had to remove a screw (step 10.5?) to remove the upper display assembly bracket. Other than that, flawless! Thanks!

    JackieME -

    The 3rd image of the 11th step shows that when the midframe is removed, some parts come along with it (at the bottom part of it). What are these parts? should they be removed too and placed in the new midframe? Are they easy to remove?

    Chris -

Conclusione

Per rimontare il tuo dispositivo, segui queste istruzioni in ordine inverso.

Autore

Sam Goldheart

Membro da: 19/10/12

465140 Reputazione

5 commenti

I cracked the "front facing" bezel on my phone. I thought buying a new mid frame would replace it, but based on these pictures, it looks like it is attached to the the front glass. Is this correct? Is there any way to replace just that front facing bezel?

Marwan -

i was wondering the same thing. Can you guys please respond.

Rival Archer -

Yes, the bezel is attached to the front glass. Replacing the glass doesnt cost too much (under 15 eur here) but theres a high chance you will break the lcd digitizer in the process. It needs some skill.

Mark Bernstein -

Hi... Is that the whole body is model GT-I9505 and How much it costs me the whole body?

Priya -

Hi.. Is that the whole body is with mirror and how much it costs me??

Priya -