Supersonic Matrix SC-91MID Back cover Replacement

Scritto Da: Jake
  • Commenti: 1
Supersonic Matrix SC-91MID Back cover Replacement

Difficoltà

Moderate

Passi

4

Tempo Necessario

30 - 50 minuti

Introduzione

In this guide, you will remove the back cover of the Supersonic Matrix SC-91MID to access the internal hardware.

  1. xdNMXdvXX6LwTaVg

    • Use an opening tool to separate the back cover of the tablet by wedging the tool into the crease between the back cover and touchscreen.

    • Work your way around the perimeter of the tablet to detach the back cover and remove it carefully so you don't rip any cables attached.

  2. ABxxsaqL6kW45JHr

    • Use a spudger to carefully disconnect the display ribbons from the motherboard.

  3. SxNSZ32ZrTLRw5qq

    • To remove the battery, use the spudger to pry the battery up and away from the tablet.

    • You might have some difficulty removing due to glue holding the battery in place.

    • Work your way around the perimeter of the battery with the spudger or opening picks gently so you don't bend or puncture the battery.

  4. cQifIMhTnckwDdau
    cQifIMhTnckwDdau
    pZhINXBVStqHuWbk

    • Use a spudger to remove the speakers.

    • To remove the motherboard, remove the three screws that hold the board in place with a Phillips screwdriver.

    What size mm is the screwdriver?

    Finn Cole -

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Jake

Membro da: 23/03/17

213 Reputazione

0 commenti