TomTom Go 60 S Speaker Replacement

Scritto Da: Tomy Peralta
  • Commenti: 2
TomTom Go 60 S Speaker Replacement

Difficoltà

Easy

Passi

5

Tempo Necessario

5 - 10 minuti

Introduzione

If you need to replace the speaker of your TomTom Go 60 S, use this guide. After removing the covering for the device, the button cell battery will be located underneath the motherboard.

Before you begin the repair, turn off the device and disconnect the battery from the motherboard.

  1. NTGTKL2eI1mNK3UI

    • Use the iFixit opening tool to pry open the TomTom Go 60 S. Start from a corner and drag the tool around the device.

  2. IkxbWf2IsQhNflD4

    • Disconnect the screen from the motherboard by removing the yellow ribbon connector from the socket.

  3. kvYYoojcVBGFABDJ

    • Remove all six screws from the motherboard with a Philips #000 screwdriver.

  4. 1CtOPfa3nyVqZfFD
    1CtOPfa3nyVqZfFD
    suqJab3MhC3I1IHB

    • Disconnect the battery and speaker ribbon cables from the motherboard.

  5. IP6rVimSdLZm1JGh
    IP6rVimSdLZm1JGh
    i2InXaslEAoIvpKa

    • Use a spudger to remove the speaker from back case.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Tomy Peralta

Membro da: 04/10/16

133 Reputazione

2 commenti

This is not a button cell battery, it is a speaker

Jurgen Bullaert -

Hi @jurgenbullaert, Good catch. We've corrected the errors in the guide. Thanks for your help!

Sarah Westberg -